930 Mig Wire for General Purpose Applications is our most popular Mig Wire. It’s excellent for all types of mild steel applications. Create stronger welds on applications needing higher strength (up to 80,000 PSI tensile strength). Use 930 on a variety of welding applications including truck frames, machinery, auto body, angle/square tubing, plows, and truck bodies. No slag chipping required! Use with 75% Argon 25% CO2 or 100% CO2 Shielding gas.
Previous product
Back to products
12MCP for High Abrasion and Mild Impact
$389.00 – $391.00
930 Mig Wire for General Purpose Applications
$10.98 – $196.68
930 Mig Wire for General Purpose Applications is excellent for all types of mild steel applications. Create stronger welds! No slag chipping required!
Additional information
| Weight | N/A |
|---|---|
| Diameter | .023, .030, .035, .045 |
| Weight | 11 lbs, 2 lbs, 33 lbs, 8 lbs (4X 2lbs) |
| Mig Wire | Mild Steel |
| Tensile Strength/Hardness | 80,000 PSI |
| Shielding Gas | 75% Argon / 25% CO2 or 100% CO2 |
| Welding Process |
Safety Data Sheet (SDS)
Download SDS here
Related products
Close
50FC Welding Rod for Brazing
50FC welding rod for brazing is for build-up of worn brass, bronze, and steel parts. Also excellent on Cast Iron. It's wear-resistant and very machinable.
Close
Cut Rod for All Metals
Cut Rod for All Metals is designed for cast iron, aluminum, stainless steel, and copper. No compressed air needed! Works on AC welder.
Close
12 Mig Wire for Hardfacing Applications
Our 12 Mig Wire for General Purpose Applications provides a good combination of abrasion resistance and toughness. Not for build-up. Maximum 1 to 2 layers.
Close
Chamfer Rod for Gouging and Cutting
Chamfer Rod for Gouging and Cutting can be used on steel, Cast Iron, Aluminum, Copper, Nickel, and Stainless.
Sale
Close
HSP90 Welding Putty
HSP90 welding putty is used for insulating and position parts for welding. It can protect against heat up to 3000°F.
SAVE WEAR PLATES
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
Hot
Close
6 Mig Wire for Build-Up and Joining
Create a cushion layer for your hardface using our #6 Mig Wire for Build-Up and Joining! Builds up very fast and has easy slag removal.
Close
770 Welding Rod for Cast Iron
770 Welding Rod for Cast Iron is excellent for welding in deep recesses or on non-conductive coating. Creates very strong joins on cast & steel applications.
Reviews
There are no reviews yet.