Previous product
Back to products
SAVE WEAR PLATES
$20.45 – $27.92
Next product
BEST WELDS SKU # 0384-2704 – BEST WELD 350 DELUXE OUTFIT
$505.76 $379.32
Spray Torch Kit
$799.00
WRC Spray Torch Kit a thermal spray torch for adding powdered metal protective coatings to wear surfaces. Available different types of powders are gravity fed through the spray torch using oxygen and acetylene bonding to the worn base metal. The WRC spray torch can be used in all positions on different types of metals including steels, alloyed steels, cast iron, and stainless steel. Check out the demonstration video below.
Related products
12 Hardfacing Electrode for Severe Wear
If you have thinner, worn parts, then you'll want to use our 12 Welding Rod for Severe Wear. It has a smooth surface overlay and can be used out of position. Excellent two pass hard surfacing electrode.
Close
6 Welding Rod for Build-Up and Joining
6 Welding Rod for Build-Up and Joining is our most popular Hardfacing Welding Rod. It's an excellent choice for repairing worn equipment or steel and manganese parts.
Close
WR1247 SHEAR HARDFACE
WR1247 Is made to give maximum wear to the shear while still allowing machinability to the base. Deposits reach maximum hardness as deposited. And can be tempered to reduce stress. Weld deposit is highly shock resistant and resistant to heat checking. Apply a maximum of two passes of WR1247 only. Use WR#32 first if Build-up is needed.
Available in 1/16 diameter 25lb spool.
12MCP for High Abrasion and Mild Impact
12MCP for High Abrasion and Mild Impact is our newer version of 12 Mig Wire. It's an all position metal core hardface designed for 2-passes.
Close
12 Mig Wire for Hardfacing Applications
Our 12 Mig Wire for General Purpose Applications provides a good combination of abrasion resistance and toughness. Not for build-up. Maximum 1 to 2 layers.
SAVE WEAR PLATES
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
9 Tubular Chrome Carbide Hardface
Our 9 Welding Rod for Large Area Hardfacing is our tubular chrome carbide product. It's great for applying out of position in large areas that need protecting.
Watch the video to the left. Dave Miller explains #9 in depth.
Watch our demo video on Facebook
6 Mig Wire for Build-Up and Joining
Create a cushion layer for your hardface using our #6 Mig Wire for Build-Up and Joining! Builds up very fast and has easy slag removal.
Reviews
There are no reviews yet.