| Weight | N/A |
|---|---|
| Diameter | .045, 1/16 |
| Weight | 33lbs |
Back to products
Next product
SAVE WEAR PLATES
$20.45 – $27.92
32BR Solid Low-Hydrogen MIg Wire
$158.07 – $176.96
Weldingrods.com #32BR will produce high strength welds on a wide range of base metals such as problem steels to the basic carbon and low alloy base metals. Its silicon level with molybdenum and manganese gives you excellent arc stability, low spatter, yielding a flat bead with excellent impact values. 32BR has a high ductile tensile strength in the 100,000 psi range. 32BR produces Hi quality and porosity-free welds even over poorly cleaned base metals. This high strength solid MIG wire is also excellent for out of position MIG welding.
Additional information
Related products
#725 Cast Iron
"Excellent for Welding Cast to Steel"
SAVE WEAR PLATES
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
32 Mig Wire for Heavy Equipment
Our #32 fluxed core Mig Wire for Heavy Equipment is a high strength, all position, maintenance wire. It's used primarily for joining of heavy equipment. The smoothest running fluxed core mig wire available.
930 Mig Wire for General Purpose Applications
930 Mig Wire for General Purpose Applications is excellent for all types of mild steel applications. Create stronger welds! No slag chipping required!
3100 Welding Rod for Aluminum
3100 Welding Rod for Aluminum is great for high strength joins on truck and trailer bodies, foundry castings, aluminum angle, and tubing.
12 Mig Wire for Hardfacing Applications
Our 12 Mig Wire for General Purpose Applications provides a good combination of abrasion resistance and toughness. Not for build-up. Maximum 1 to 2 layers.
WR1247 SHEAR HARDFACE
WR1247 Is made to give maximum wear to the shear while still allowing machinability to the base. Deposits reach maximum hardness as deposited. And can be tempered to reduce stress. Weld deposit is highly shock resistant and resistant to heat checking. Apply a maximum of two passes of WR1247 only. Use WR#32 first if Build-up is needed.
Available in 1/16 diameter 25lb spool.
770 Welding Rod for Cast Iron
770 Welding Rod for Cast Iron is excellent for welding in deep recesses or on non-conductive coating. Creates very strong joints on cast & steel applications. Excellent for many different applications :
Pump bodies, Compressors, Machine frames, Casting defects, Lathes, Pulleys, Dies, Levers, Gears, Generators, Flanges, Tables and engine blocks.
Weldingrods.com 770 Cast iron is fully machinable and has a tensile strength of up to 55,000psi.
Reviews
There are no reviews yet.