909 Welding Rod for Rusty Equipment is our high-penetrating Mild Steel Electrode. It burns hot and is excellent on dirty, greasy welds. Welds poor fitting joints in all positions. Complete multiple pass welds without slag removal. Welding rod can be bent without flux breakage. Performs well on plow blades and has plenty of Tensile Strength at 80,000 PSI. Use with a buzz box welder or small machine.
Previous product
Back to products
930 Welding Rod (MG500 type)
$25.00 – $259.50
Next product
770 Welding Rod for Cast Iron
$77.00 – $489.90
909 Welding Rod for Rusty Equipment *2 lb Packs
$25.00 – $190.50
909 Welding Rod for Rusty Equipment is our most versatile mild steel welding electrode. It’s excellent on dirty, greasy metals and rusty equipment.
Additional information
| Weight | N/A |
|---|---|
| Diameter | 1/8, 3/32, 5/32 |
| Weight | 10 lbs, 2 lb, 50 lbs |
| Electrode | |
| AWS Alternative | |
| Type of Current | AC, DC |
| Tensile Strength/Hardness | 80,000 PSI |
Safety Data Sheet (SDS)
Download SDS here
Related products
50FC Welding Rod for Brazing
50FC welding rod for brazing is for build-up of worn brass, bronze, and steel parts. Also excellent on Cast Iron. It's wear-resistant and very machinable.
Cut Rod for All Metals
Cut Rod for All Metals is designed for cast iron, aluminum, stainless steel, and copper. No compressed air needed! Works on AC welder.
HSP90 Welding Putty
HSP90 welding putty is used for insulating and position parts for welding. It can protect against heat up to 3000°F.
32BR Solid Low-Hydrogen MIg Wire
Weldingrods.com #32BR will produce high strength welds on a wide range of base metals such as problem steels to the basic carbon and low alloy base metals. Its silicon level with molybdenum and manganese gives you excellent arc stability, low spatter, yielding a flat bead with excellent impact values. 32BR has a high ductile tensile strength in the 100,000 psi range. 32BR produces Hi quality and porosity-free welds even over poorly cleaned base metals. This high strength solid MIG wire is also excellent for out of position MIG welding.
930 Welding Rod (MG500 type)
NOW AVAILABLE IN 2 LB PACKAGES!
MG500 TYPE WELDING ROD 930 Welding Rod for Mild Steel is a versatile, low allow steel for all purposes. It's our most popular out-of-position steel electrode.
Chamfer Rod for Gouging and Cutting
Chamfer Rod for Gouging and Cutting can be used on steel, Cast Iron, Aluminum, Copper, Nickel, and Stainless.
6 Welding Rod for Build-Up and Joining
6 Welding Rod for Build-Up and Joining is our most popular Hardfacing Welding Rod. It's an excellent choice for repairing worn equipment or steel and manganese parts.
SAVE WEAR PLATES
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
Reviews
There are no reviews yet.