Showing all 9 results

Show sidebar

12 Hardfacing Electrode for Severe Wear

$179.60$652.05
If you have thinner, worn parts, then you'll want to use our 12 Welding Rod for Severe Wear. It has a smooth surface overlay and can be used out of position. Excellent two pass hard surfacing electrode.
12 Mig Wire for General Purpose Applications
Close

12 Mig Wire for Hardfacing Applications

$360.50$399.00
Our 12 Mig Wire for General Purpose Applications provides a good combination of abrasion resistance and toughness. Not for build-up. Maximum 1 to 2 layers.

12MCP for High Abrasion and Mild Impact

$389.00$391.00
12MCP for High Abrasion and Mild Impact is our newer version of 12 Mig Wire. It's an all position metal core hardface designed for 2-passes.

6 Mig Wire for Build-Up and Joining

$222.00$227.00
Create a cushion layer for your hardface using our #6 Mig Wire for Build-Up and Joining! Builds up very fast and has easy slag removal.
Premium Maintenance Alloys | welding rod plant | aluminum welding rods, lincoln mig welder
Close

6 Welding Rod for Build-Up and Joining

$142.90$622.50
6 Welding Rod for Build-Up and Joining is our most popular Hardfacing Welding Rod. It's an excellent choice for repairing worn equipment or steel and manganese parts.

9 Tubular Chrome Carbide Hardface

$220.20$829.20
Our 9 Welding Rod for Large Area Hardfacing is our tubular chrome carbide product. It's great for applying out of position in large areas that need protecting. Watch the video to the left. Dave Miller explains #9 in depth. Watch our demo video on Facebook

SAVE WEAR PLATES

$20.45$27.92
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
Close

Spray Torch Kit

$799.00
WRC Spray Torch Kit a thermal spray torch for adding powdered metal protective coatings to wear surfaces. Available different types of powders are gravity fed through the spray torch using oxygen and acetylene bonding to the worn base metal. The WRC spray torch can be used in all positions on different types of metals including steels, alloyed steels, cast iron, and stainless steel. Check out the demonstration video below.
Close

WR1247 SHEAR HARDFACE

$615.49
WR1247 Is made to give maximum wear to the shear while still allowing machinability to the base.  Deposits reach maximum hardness as deposited. And can be tempered to reduce stress. Weld deposit is highly shock resistant and resistant to heat checking. Apply a maximum of two passes of WR1247 only. Use WR#32 first if Build-up is needed. Available in 1/16 diameter 25lb spool.