12 Hardfacing Welding Rod for severe wear. Designed for hardfacing with chrome carbide particles for severe abrasion of worn parts. The product comes in small diameters, which is great for thinner worn parts. Rockwell of 57 as welded. No more than two passes to protect the part from wear. Can also be used out of position. Smooth surface overlay. Excellent for Buckets, Plows, Rails, Hammers etc.
Hot
Previous product
Back to products
9 Tubular Chrome Carbide Hardface
$220.20 – $829.20
Next product
32 Mig Wire for Heavy Equipment
$63.69 – $196.68
12 Hardfacing Electrode for Severe Wear
$179.60 – $652.05
If you have thinner, worn parts, then you’ll want to use our 12 Welding Rod for Severe Wear. It has a smooth surface overlay and can be used out of position. Excellent two pass hard surfacing electrode.
Additional information
| Weight | N/A |
|---|---|
| Diameter | 1/8, 3/16, 5/32 |
| Weight | 10 lbs, 50 lbs |
| Electrode | |
| Type of Current | AC, DC |
Safety Data Sheet (SDS)
Download SDS here
Related products
930 Welding Rod for Mild Steel
930 Welding Rod for Mild Steel is a versatile, low allow steel for all purposes. It's our most popular out-of-position steel electrode.
GET A FREE WELDINGRODS.COM WALL CHART WITH PURCHASE!
Close
Spray Torch Kit
WRC Spray Torch Kit a thermal spray torch for adding powdered metal protective coatings to wear surfaces. Available different types of powders are gravity fed through the spray torch using oxygen and acetylene bonding to the worn base metal. The WRC spray torch can be used in all positions on different types of metals including steels, alloyed steels, cast iron, and stainless steel. Check out the demonstration video below.
Close
WR1247 SHEAR HARDFACE
WR1247 Is made to give maximum wear to the shear while still allowing machinability to the base. Deposits reach maximum hardness as deposited. And can be tempered to reduce stress. Weld deposit is highly shock resistant and resistant to heat checking. Apply a maximum of two passes of WR1247 only. Use WR#32 first if Build-up is needed.
Available in 1/16 diameter 25lb spool.
Close
Chamfer Rod for Gouging and Cutting
Chamfer Rod for Gouging and Cutting can be used on steel, Cast Iron, Aluminum, Copper, Nickel, and Stainless.
9 Tubular Chrome Carbide Hardface
Our 9 Welding Rod for Large Area Hardfacing is our tubular chrome carbide product. It's great for applying out of position in large areas that need protecting.
Watch the video to the left. Dave Miller explains #9 in depth.
Watch our demo video on Facebook
Hot
Close
32 Mig Wire for Heavy Equipment
Our #32 fluxed core Mig Wire for Heavy Equipment is a high strength, all position, maintenance wire. It's used primarily for joining of heavy equipment. The smoothest running fluxed core mig wire available.
SAVE WEAR PLATES
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
New
Close
12MCP for High Abrasion and Mild Impact
12MCP for High Abrasion and Mild Impact is our newer version of 12 Mig Wire. It's an all position metal core hardface designed for 2-passes.
Reviews
There are no reviews yet.