12 Mig Wire for Hardfacing Applications

#12 Mig Wire is a general purpose flux-cored, open-arc hardfacing wire providing a good combination of abrasion resistance and toughness.

Use it to overlay carbon and low alloy steel, manganese steel, stainless steel, and cast iron. Apply for only two final passes. Build-up is not recommended. Maximum overlay is 1 to 2 layers. Use Weldingrods.com #6 for build-up.

This alloy may relief check (depending on the type of base metal, thickness, etc.). This is normal for the application and will not break off.

Notes:

• Non-machinable
• Must be ground