770 Welding Rod for Cast Iron is our most popular machinable Cast Iron Welding Rod. It’s fully machinable and very strong on cast – steel applications.
Previous product
Back to products
909 Welding Rod for Rusty Equipment *2 lb Packs
$25.00 – $190.50
Next product
Cut Rod for All Metals
$84.90 – $87.29
770 Welding Rod for Cast Iron
$77.00 – $392.60
770 Welding Rod for Cast Iron is excellent for welding in deep recesses or on non-conductive coating. Creates very strong joints on cast & steel applications. Excellent for many different applications :
Pump bodies, Compressors, Machine frames, Casting defects, Lathes, Pulleys, Dies, Levers, Gears, Generators, Flanges, Tables and engine blocks.
Weldingrods.com 770 Cast iron is fully machinable and has a tensile strength of up to 55,000psi.
Additional information
| Weight | N/A |
|---|---|
| Diameter | 1/8, 3/32, 5/32 |
| Weight | 10 lbs, 2 lbs, 5 lbs |
| Electrode |
Safety Data Sheet (SDS)
Download SDS here
Related products
Close
32BR Solid Low-Hydrogen MIg Wire
Weldingrods.com #32BR will produce high strength welds on a wide range of base metals such as problem steels to the basic carbon and low alloy base metals. Its silicon level with molybdenum and manganese gives you excellent arc stability, low spatter, yielding a flat bead with excellent impact values. 32BR has a high ductile tensile strength in the 100,000 psi range. 32BR produces Hi quality and porosity-free welds even over poorly cleaned base metals. This high strength solid MIG wire is also excellent for out of position MIG welding.
Close
2000FC Silver Solder for Power Plants
2000FC Silver Solder for Power Plants is excellent on thin Stainless, Brass, Bronze, and Steel. It's low temperature and high-strength.
SAVE WEAR PLATES
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
Close
Chamfer Rod for Gouging and Cutting
Chamfer Rod for Gouging and Cutting can be used on steel, Cast Iron, Aluminum, Copper, Nickel, and Stainless.
Close
50FC Welding Rod for Brazing
50FC welding rod for brazing is for build-up of worn brass, bronze, and steel parts. Also excellent on Cast Iron. It's wear-resistant and very machinable.
12 Hardfacing Electrode for Severe Wear
If you have thinner, worn parts, then you'll want to use our 12 Welding Rod for Severe Wear. It has a smooth surface overlay and can be used out of position. Excellent two pass hard surfacing electrode.
9 Tubular Chrome Carbide Hardface
Our 9 Welding Rod for Large Area Hardfacing is our tubular chrome carbide product. It's great for applying out of position in large areas that need protecting.
Watch the video to the left. Dave Miller explains #9 in depth.
Watch our demo video on Facebook
Close
45FC Welding Rod for High Strength Brazing
45FC is our popular Welding Rod for High Strength Brazing. Preferred by most maintenance departments. Excellent on thin to thick welds. Use with Low Temperatures.
Reviews
There are no reviews yet.