Cut through all metals including Cast Iron, Aluminum, Stainless Steel, and Copper with our Cutting Rod for All Metals welding electrode. No compressed air needed! Works on AC welder.
Previous product
Back to products
770 Welding Rod for Cast Iron
$263.95 – $392.60
Next product
Chamfer Rod for Gouging and Cutting
$59.75 – $117.20
Cut Rod for All Metals
$84.90 – $87.29
Cut Rod for All Metals is designed for cast iron, aluminum, stainless steel, and copper. No compressed air needed! Works on AC welder.
Additional information
| Weight | N/A |
|---|---|
| Diameter | 1/8, 3/32, 5/32 |
| Weight | 10 lbs |
| Electrode | |
| Type of Current | AC, DC |
| Welding Process |
Safety Data Sheet (SDS)
Download SDS here
Related products
Close
50FC Welding Rod for Brazing
50FC welding rod for brazing is for build-up of worn brass, bronze, and steel parts. Also excellent on Cast Iron. It's wear-resistant and very machinable.
12 Hardfacing Electrode for Severe Wear
If you have thinner, worn parts, then you'll want to use our 12 Welding Rod for Severe Wear. It has a smooth surface overlay and can be used out of position. Excellent two pass hard surfacing electrode.
Close
770 Welding Rod for Cast Iron
770 Welding Rod for Cast Iron is excellent for welding in deep recesses or on non-conductive coating. Creates very strong joins on cast & steel applications.
Close
45FC Welding Rod for High Strength Brazing
45FC is our popular Welding Rod for High Strength Brazing. Preferred by most maintenance departments. Excellent on thin to thick welds. Use with Low Temperatures.
Close
130 Stainless Steel Stick Electrode
For welding stainless steels, all types with unknown analysis. Very high strength with temperatures up to 1975 ° F. No splatter, applications -heat exchangers, high temperature, petroleum refining, paper making industries. Procedure: hold a short arc, deposit stringer beads, remove slag between passes. On DC use reverse polarity.
Tensile Strength/Hardness: Up to 95,000 PSI
Type of Current: AC –DC Welding Process: ARC, MIG, TIG Ultimate stainless steel electrode.
SAVE WEAR PLATES
Weldingrods.com SaveWear Plates will save you time cladding your equipment for wear protection. SWPlates is through-hardened abrasion resistant steel, much harder and more wear resistant than conventional AR400 or AR500. It's easy to install in large or small areas.
Close
6 Welding Rod for Build-Up and Joining
6 Welding Rod for Build-Up and Joining is our most popular Hardfacing Welding Rod. It's an excellent choice for repairing worn equipment or steel and manganese parts.
Close
Chamfer Rod for Gouging and Cutting
Chamfer Rod for Gouging and Cutting can be used on steel, Cast Iron, Aluminum, Copper, Nickel, and Stainless.
Reviews
There are no reviews yet.